product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12638_lenina-s lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 16 degrees 88 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12641_lenina-s-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 20 degrees 80 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12639_lenina-m lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 28 degrees 85 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12642_lenina-m-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 33 degrees 77 % - available september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 1/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12640_lenina-w lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 50 degrees 86 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12643_lenina-w-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 52 degrees 78 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 2/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 general information - product series especially designed & optimized for cxa2011 series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (110 degrees of celcius / 230 degrees of fahrenheit). - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 3/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 base material pc, white reflector material pc metal plated with clear lacquer a d b c a d 3 2 3 2 4 1 4 1 designed by pl date checked by date drawn by date this drawing is our property. it can't be reproduced or communicated without our written agreement. scale weight(g) sheet 1/1 size a4 drawing number -- rev 1 drawing title ledil oy salorankatu 10 fin-24240 salo finland datasheet lenina series 08.03.2012 08.03.2012 pl 1:1 note: u sing optional sublens, add 2.1mm to the system height dimension 'h2' varies from 4.5mm to 7mm depending on the led specific base part 40 h2 74 lens material: pc, clear
product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12638_lenina-s lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 16 degrees 88 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12641_lenina-s-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 20 degrees 80 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12639_lenina-m lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 28 degrees 85 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12642_lenina-m-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 33 degrees 77 % - available september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 1/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12640_lenina-w lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 50 degrees 86 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12643_lenina-w-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 52 degrees 78 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 2/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 general information - product series especially designed & optimized for cxa2011 series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (110 degrees of celcius / 230 degrees of fahrenheit). - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 3/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 base material pc, white reflector material pc metal plated with clear lacquer a d b c a d 3 2 3 2 4 1 4 1 designed by pl date checked by date drawn by date this drawing is our property. it can't be reproduced or communicated without our written agreement. scale weight(g) sheet 1/1 size a4 drawing number -- rev 1 drawing title ledil oy salorankatu 10 fin-24240 salo finland datasheet lenina series 08.03.2012 08.03.2012 pl 1:1 note: u sing optional sublens, add 2.1mm to the system height dimension 'h2' varies from 4.5mm to 7mm depending on the led specific base part 40 h2 74 lens material: pc, clear
product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12638_lenina-s lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 16 degrees 88 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12641_lenina-s-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 20 degrees 80 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12639_lenina-m lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 28 degrees 85 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12642_lenina-m-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 33 degrees 77 % - available september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 1/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12640_lenina-w lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 50 degrees 86 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12643_lenina-w-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 52 degrees 78 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 2/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 general information - product series especially designed & optimized for cxa2011 series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (110 degrees of celcius / 230 degrees of fahrenheit). - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 3/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 base material pc, white reflector material pc metal plated with clear lacquer a d b c a d 3 2 3 2 4 1 4 1 designed by pl date checked by date drawn by date this drawing is our property. it can't be reproduced or communicated without our written agreement. scale weight(g) sheet 1/1 size a4 drawing number -- rev 1 drawing title ledil oy salorankatu 10 fin-24240 salo finland datasheet lenina series 08.03.2012 08.03.2012 pl 1:1 note: u sing optional sublens, add 2.1mm to the system height dimension 'h2' varies from 4.5mm to 7mm depending on the led specific base part 40 h2 74 lens material: pc, clear
product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12638_lenina-s lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 16 degrees 88 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12641_lenina-s-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 20 degrees 80 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12639_lenina-m lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 28 degrees 85 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12642_lenina-m-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 33 degrees 77 % - available september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 1/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 ordering number family type led color diameter height style optic material holder material fastening status cn12640_lenina-w lenina reflector cxa2011 metal 74 mm 46.95 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 50 degrees 86 % - available ordering number family type led color diameter height style optic material holder material fastening status cn12643_lenina-w-dl lenina reflector cxa2011 metal 74 mm 49.05 mm round pc pc screw ready fwhm efficiency cd/lm gerber file 52 degrees 78 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 2/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet lenina series last update 29/5/2012 general information - product series especially designed & optimized for cxa2011 series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (110 degrees of celcius / 230 degrees of fahrenheit). - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). september 14th 2012 18:42 copyright ledil oy - subject to change without prior notice - page 3/3 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 base material pc, white reflector material pc metal plated with clear lacquer a d b c a d 3 2 3 2 4 1 4 1 designed by pl date checked by date drawn by date this drawing is our property. it can't be reproduced or communicated without our written agreement. scale weight(g) sheet 1/1 size a4 drawing number -- rev 1 drawing title ledil oy salorankatu 10 fin-24240 salo finland datasheet lenina series 08.03.2012 08.03.2012 pl 1:1 note: u sing optional sublens, add 2.1mm to the system height dimension 'h2' varies from 4.5mm to 7mm depending on the led specific base part 40 h2 74 lens material: pc, clear
|
